北京赛车PK10开奖直播历史记录

Shenzhen Jitian Chemical Co., Ltd.

Focused on adhesive materials and adhesive applications
for more than 20 years

+86-755-88834518

PRODUCT CENTER

Adhesive For Wood Splice
Application/Uses
·solid wood panels,
·refers to the grounding plate,
·solid wood furniture splicing,
·structural material bonding,
·outdoor solid wood bonding.

Key Atrributes
·fast curing speed,
·high bonding strength,
·excellent weather resistance;
·curing at room temperature;
·no harmful substances such as formaldehyde,
·phenol and heavy metals; widely used.
  • Description
  • Specification
  • Application/Uses
    ·solid wood panels,
    ·refers to the grounding plate,
    ·solid wood furniture splicing,
    ·structural material bonding,
    ·outdoor solid wood bonding.
     
    Key Atrributes
    ·fast curing speed,
    ·high bonding strength,
    ·excellent weather resistance;
    ·curing at room temperature;
    ·no harmful substances such as formaldehyde,
    ·phenol and heavy metals; widely used.
    Typical Properties
    Main agent: milky white viscous liquid; viscosity: 12000-20000 mPa.s; solid content: 45-54%; PH: 6-6.5.
    Curing agent: dark brown; viscosity 200 mPa.s
    Model solid content viscosity suitable wood material curing agent ratio
    801 54±2% 15000-20000 Hardwood, such as Wujinmu 100:13-15
    805 45±2% 12000-16000 Medium, such as oak, birch 100:10
    808 42±2% 10000-14000 Cork, such as pine 100:10
     
    Operating procedures
    Main agent and curing agent ratio 100:10-15 Too low curing agent will affect weather resistance, too high is too brittle
    Active period 1 hour The higher the temperature, the shorter the activity period
    Glue amount 200-250g/㎡ The rougher the surface of the wood, the more the amount
    Wood moisture content 8-12% Affects curing time, too high, easy to deform, cracking
    Operating temperature >10℃ The temperature is low and the pressure is long
    Pressure time 45-90min Baking heating is required when the temperature is below 10 °C
    Pressure 8-10kg/c㎡ The harder the wood, the greater the pressure
    Post-release time after pressure relief 24-72 hour After 72 hours, the bond strength is maximum
     
    Precautions:
    ·The main agent and curing agent are proportioned before use and stirred evenly. According to the principle of less allocation and diligence.
    ·Bubbles are generated after about 20 minutes after compounding. This is normal. The higher the temperature, the more bubbles.
    ·The glue is used up within 1 hour, otherwise the effect of the wood board is greatly reduced.
    ·Apply pressure as soon as possible after applying the glue, no more than 10 minutes at the latest.
    ·The pressure time is greatly affected by the temperature and needs to be grasped.
    ·After pressure relief, it should be placed for at least 24 hours before entering the next step.
     
     
    Comments
    Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
     
    Packing:
    The standard package of series resins is 20KG/drum.  (note : the product’s specs and packing can be customized according to requirements.)
     
    Storage:
    storage under normal conditons and quick processing of opening bag is recommed.
     
    REMARK
    Jitian Chemical shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the enviroment , and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product and nothing herein waves any of the seller's conditions of sale.